Jump to content


How does one change "Status"

  • Please log in to reply
6 replies to this topic

#1 afterthought



  • Members
  • Pip
  • 3 posts

Posted 27 January 2014 - 05:05 PM

my  "device" indicates that it is "disconnected" how can I change it to "OK" ?

#2 jpastor


    Development leader

  • Administrators
  • 180 posts

Posted 28 January 2014 - 08:54 AM

Hello afterthought.

When you define your device, you have two fields named "Data Stream Frequency" and "Status Stream Frequency". This fields are a number representing the time range in which a data stream should be received (expressed in minutes).

If your device doesn't recive a stream in that timespan, their status will be automatically "disconnected", but If you send a stream your device will change to "OK".

To know more about the different inner device status, please visit:




Enjoy Carriots!

#3 laempresatecnologica



  • Members
  • Pip
  • 4 posts

Posted 02 March 2015 - 08:54 PM



I had the same problem so I reduced the Frequency numbers to 1. I expected that if I sent more than 1 mqtt message per minute, the status would change to OK, but it didn't.


When I switch on my device, I send a "status" message and then it begins to send a "stream" message every 5 seconds, which should be the frequency numbers?


Thanks in advance!

#4 laempresatecnologica



  • Members
  • Pip
  • 4 posts

Posted 03 March 2015 - 07:27 PM

I misunderstood the term "Frequency". I thought in times per second instead of at least one in that range of time.


By the way, very good platform !!

#5 sdeancos


    Master of Puppets

  • Members
  • PipPipPip
  • 108 posts
  • LocationMadrid, Spain.

Posted 04 March 2015 - 10:37 AM



you can learn more about status and frequency in https://www.carriots...ce_inner_status



i hope this help you.



#6 boopathi



  • Members
  • Pip
  • 9 posts

Posted 21 December 2017 - 11:16 AM

hi actually im using Mbed Mqtt library i have problem while publishing the data . i dont know how to use this library along with my project 


how do that below


user name:

password :

topic :


#7 mbaeoi



  • Members
  • PipPip
  • 10 posts

Posted 26 December 2017 - 12:17 PM

Hi friend

If you want to send a data streams to Carriots, all the information that you need is:

Host: mqtt.carriots.com     
Port: 1883     
Username: your apikey
Password: empty

You can publish xml or json to these topics.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users